If your home uses electric heating, you may have seen a large wall-mounted heater that stores warmth overnight and releases it during the day. This is called a storage heater, or sometimes a night storage heater.
Storage heaters are common in flats, older properties and homes without a gas central heating system. They are designed to take advantage of cheaper off-peak electricity, often through an Economy 7 tariff. However, they need to be set up properly. If you store too much heat, release it too quickly or rely on daytime boost settings, your electricity bills can become expensive.
So, how do storage heaters work, how much do they cost to run, and are they still worth using in 2026?
This guide explains the different types, how to use their controls, what affects running costs and how to avoid wasting electricity.
Quick Guide: Storage Heaters in the UK
Storage heaters use electricity to warm an internal core, usually made from dense ceramic or similar heat-retaining material. They normally charge overnight when electricity is cheaper on a time-of-use tariff, then release the stored heat during the following day.
- Best suited to: Homes with cheaper off-peak electricity and a predictable heating routine.
- Common tariff: Economy 7, although other time-of-use tariffs may also work.
- Older controls: Usually have input and output dials.
- Modern controls: May include a thermostat, timer and automatic charging.
- Main money-saving tip: Store only the heat you expect to need and avoid unnecessary daytime boost settings.
Storage heaters can be economical when used correctly, but they are not automatically cheaper than every other heating system.
What Is a Storage Heater?
A storage heater is an electric heating appliance that stores warmth inside an insulated core. Instead of producing all its heat at the moment you switch it on, it charges up in advance and releases that heat later.
Most traditional models contain heavy ceramic or clay bricks. During the charging period, electricity passes through heating elements inside the unit. These elements warm the internal bricks, which retain heat for several hours.
The heater then releases warmth into your room gradually.
You may hear people call them:
- Night storage heaters
- Electric storage heaters
- Storage radiators
- Night heaters
These names generally refer to the same type of heating system.
Storage heaters are particularly useful in properties where gas central heating is unavailable or unsuitable. You may find them in flats, rented accommodation, older buildings and some all-electric homes.
How Do Storage Heaters Work?
Storage heaters work in two main stages: charging and releasing heat.
1. Charging During Off-Peak Hours
The heater uses electricity to warm its internal core. Many households charge their storage heaters overnight when their electricity tariff offers a cheaper rate.
For example, a household on Economy 7 may have seven off-peak hours, although the exact times depend on the supplier, tariff and location.
The heating elements warm the internal bricks, which store energy as heat.
The amount of electricity used depends on the heater’s power rating and how long it charges. A larger heater or a higher input setting will generally use more electricity.
2. Releasing Heat During the Day
Once the internal bricks are warm, the heater gradually releases heat into the room.
Older models usually release some warmth naturally through their casing. Many also have an output control that changes how quickly heat escapes.
Modern storage heaters may use a fan, thermostat and programmed heating periods to give you more control over the temperature.
The main idea is simple: you buy electricity during cheaper hours, store the resulting heat and use it when you need it.
The Energy Saving Trust explains the difference between traditional and modern storage heaters in its electric storage heaters guide.
Do Storage Heaters Need Economy 7?
No, storage heaters do not strictly require Economy 7. However, they are usually designed to work with a tariff that offers cheaper electricity at certain times.
Economy 7 is one of the best-known options. It provides a cheaper off-peak rate for seven hours, with a higher rate during the rest of the day.
Other time-of-use tariffs may also be suitable, depending on their charging periods and the way your heater is connected.
Before choosing a tariff, check:
- Your current daytime electricity rate.
- Your overnight or off-peak rate.
- The hours when the cheaper rate applies.
- Whether your meter records electricity usage separately.
- Whether your storage heater is connected to the correct supply.
Do not assume your off-peak period is always midnight to 7am. Your supplier and meter arrangements determine the actual times.
If you want to understand the tariff in more detail, read our guide to Economy 7 electricity and whether it is worth it for UK homes in 2026.
Types of Storage Heaters
Not every storage heater works in exactly the same way. Older models have basic manual controls, while modern versions offer better temperature management and heat retention.
1. Traditional Storage Heaters
Traditional storage heaters are usually easy to recognise. They are often large, heavy and mounted against a wall.
Most have two main controls:
- Input or charge
- Output or boost
You decide how much heat the heater stores overnight and how quickly it releases that heat during the day.
These models can be economical with the right tariff, but they require planning. If you store too little heat, the room may become cold later in the day. Store too much and you may pay for electricity you do not need.
Older models can also lose heat more quickly because their insulation is generally less effective than that of modern units.
2. Modern Storage Heaters
Modern storage heaters offer more control over heating.
Depending on the model, they may include:
- Digital displays
- Programmable timers
- Room thermostats
- Automatic charging controls
- Temperature sensors
- Better insulation
Some models can adjust how much heat they store according to the room temperature, outside conditions and your previous heating pattern.
This can make them easier to manage than older heaters with manual dials.
3. High Heat Retention Storage Heaters
High heat retention storage heaters are designed to keep stored warmth inside for longer.
They usually have improved insulation, electronic controls and better ways of distributing heat around the room.
Some models also include fans to release heat when required.
They can cost more to buy than traditional storage heaters, so it is worth comparing the purchase price, installation costs and expected energy use before upgrading.
A more expensive model does not automatically mean lower bills for every household. Your tariff, heating routine and property insulation still matter.
How to Use Storage Heater Controls
Understanding the controls is one of the easiest ways to avoid wasting electricity.
Traditional storage heaters usually have two dials. Their names may differ slightly between manufacturers, so check your user manual before changing unfamiliar settings.
What Does the Input Setting Do?
The input dial controls how much electricity the heater uses to store heat during its charging period.
A higher setting generally means:
- More electricity is used.
- The internal core becomes hotter.
- More heat is available for the following day.
A lower setting means the heater stores less heat.
You should adjust the input according to the weather and your routine. On a mild day, you may not need as much stored heat as you would during a cold spell.
What Does the Output Setting Do?
The output dial controls how quickly the stored heat is released.
A higher setting releases warmth more quickly. If you leave it high throughout the day, the heater may run out of stored heat before the evening.
A lower setting slows the release of warmth, helping it last longer.
One important point: lowering the output setting does not undo the electricity already used to charge the heater. It simply changes how quickly the stored heat escapes.
What Is the Boost Setting?
Some storage heaters have a boost function.
This can provide extra warmth when the stored heat is not enough. However, depending on the model, boost may use electricity at the current daytime rate rather than the cheaper overnight rate.
That can make it expensive if you use it regularly.
Check your heater’s manual to understand whether its boost function uses stored heat or draws additional electricity from the mains.
Best Storage Heater Settings for Different Seasons
There is no single setting that works for every storage heater. The correct position depends on the model, room size, insulation, outside temperature and how much time you spend at home.
The following table is a general starting point for traditional manual heaters. It is not a universal manufacturer’s setting.
| Season | Input or charge | Output |
|---|---|---|
| Spring | Low, depending on the weather | Low |
| Summer | Usually off if heating is unnecessary | Low or off |
| Autumn | Low to medium | Adjust to comfort |
| Winter | Medium to high, depending on demand | Increase when needed |
For older heaters, try this routine:
- Before bed, decide how much heat you are likely to need the following day.
- Set the input control according to the expected weather.
- Keep the output low overnight.
- During the morning, release only enough warmth to keep the room comfortable.
- Turn the output down when you leave home.
- Increase it later if you need more warmth in the evening.
For digital models, use the manufacturer’s recommended thermostat and timer settings instead of copying advice intended for manual heaters.
The Energy Saving Trust recommends setting a comfortable temperature and using the timer to match your daily routine. Its guidance also explains why setting the temperature too high can use more stored heat than necessary.
How Much Do Storage Heaters Cost to Run?
The cost of running a storage heater depends on several factors:
- Its power rating.
- How many hours it charges.
- Your off-peak electricity rate.
- Your daytime electricity rate.
- How much heat your home needs.
- How well your property retains warmth.
There is no single running cost that applies to every UK household.
The easiest way to estimate the cost is to use this calculation:
Electricity used (kWh) × electricity price per kWh = energy cost
For example, imagine a storage heater uses 3 kWh during its overnight charging period and your off-peak electricity rate is 15p per kWh.
3 kWh × £0.15 = £0.45
In this example, charging the heater would cost 45p.
This is an illustration, not a current supplier quote. Your actual cost will depend on your meter readings and tariff. It also excludes any standing charge, which is usually payable separately.
Example: Comparing Different Charging Levels
Suppose the same heater uses different amounts of electricity on different nights.
| Electricity used | Off-peak rate | Charging cost |
|---|---|---|
| 2 kWh | 15p/kWh | 30p |
| 3 kWh | 15p/kWh | 45p |
| 5 kWh | 15p/kWh | 75p |
| 7 kWh | 15p/kWh | £1.05 |
The example shows why the input setting matters. Storing more heat requires more electricity.
If you have several storage heaters, their combined consumption can make a noticeable difference to your bill during colder months.
For a more accurate estimate, check the heater’s power rating, the number of charging hours and your actual off-peak rate.
Are Storage Heaters Cheaper Than Electric Radiators?
Storage heaters can be cheaper to run than ordinary direct electric heaters when they use cheaper off-peak electricity.
However, the comparison depends on how much electricity each system uses and when it uses it.
A direct electric radiator normally converts electricity into heat when you switch it on. If you use it during peak hours, you pay the daytime rate.
A storage heater charges in advance and releases heat later. This allows you to use electricity at a cheaper time, provided your tariff offers a suitable off-peak rate.
But there are disadvantages.
Traditional storage heaters may release heat when you do not need it. They can also run out of stored warmth before the evening, leaving you to use an additional heater.
A modern storage heater with good controls may offer more flexibility, but the initial purchase price can be higher.
Before replacing your heating system, compare the total cost of buying, installing and running each option.
8 Practical Ways to Save Money With Storage Heaters
You do not always need to replace your heaters to improve their performance. A few changes to your daily routine can help reduce wasted electricity.
1. Adjust the Input According to the Weather
Avoid leaving the input dial on maximum throughout the year.
On milder days, you may need less stored heat. Check the forecast and adjust the setting before the overnight charging period.
2. Keep the Output Low When You Are Asleep
There is little reason to release large amounts of heat while you are sleeping if you do not need it.
For manual models, turn the output down before going to bed. This helps retain warmth for the following day.
3. Avoid Unnecessary Boost Settings
Boost can be useful when you genuinely need extra warmth, but regular use may increase costs.
Check whether your model uses peak-rate electricity for boost and try to avoid relying on it as your main heating method.
4. Use Timers on Modern Heaters
If your heater has a timer, programme it around your routine.
For example, you might want the room warm in the morning and again in the evening rather than releasing heat continuously when nobody is home.
5. Improve Your Home’s Insulation
Poor insulation allows warmth to escape through roofs, walls, floors and windows.
Simple measures such as draught-proofing doors and windows can make rooms feel more comfortable. Larger improvements, such as loft or cavity wall insulation, may also help where suitable.
Check whether your property is suitable before paying for insulation work.
6. Keep Furniture Away From the Heater
Avoid placing large furniture directly in front of a storage heater.
Blocked airflow can affect how heat moves around the room. Follow the manufacturer’s clearance instructions and never cover the heater with clothing or other items.
7. Check Your Electricity Tariff
A storage heater may not save you money if you are paying a high rate for the electricity it uses.
Compare your daytime and off-peak rates. Make sure the cheaper charging period matches your heater’s operating schedule.
You can also read our guide on 15 ways to cut energy bills this winter in the UK for more household energy-saving ideas.
8. Monitor Your Electricity Usage
Check your electricity meter or supplier account regularly.
If your consumption suddenly increases, investigate whether your heaters are charging for longer, whether boost is being used or whether another appliance is consuming more electricity.
If your smart meter is not recording readings correctly, see our guide to Smart meters UK.
Are Storage Heaters Worth It in 2026?
Storage heaters can still be a useful option for UK homes in 2026, particularly where there is no gas supply and a suitable off-peak electricity tariff is available.
They may work well if:
- You regularly need heating during the day.
- Your home has a suitable time-of-use tariff.
- You can plan how much heat you need.
- Your heaters have effective controls.
- Your property retains heat reasonably well.
They may be less suitable if you need instant heating at different times, spend most of the day away from home or have a tariff with little difference between daytime and off-peak rates.
The type of heater also matters. Older models can be harder to control and may lose heat more quickly. Modern high heat retention models offer better control, but their purchase and installation costs need to be considered.
There is no reason to replace a working heater without comparing the likely costs and benefits first.
Should You Replace Old Storage Heaters?
It may be worth considering an upgrade if your existing heaters are difficult to control, release too much heat overnight or regularly leave your rooms cold by evening.
Before buying new equipment, check:
- The age and condition of your current heaters.
- Whether their controls work properly.
- How much electricity they use.
- Whether your tariff is suitable.
- The cost of a replacement and installation.
- Whether insulation improvements could help first.
High heat retention models may be more efficient at keeping warmth inside the unit. However, the savings will depend on how you use the heater and how much of your heating demand can be shifted to cheaper electricity.
If you rent your home, speak to your landlord before arranging replacement work.
For some households, a different heating system may be worth investigating. Heat pumps, for example, can be more efficient than direct electric heating, but installation suitability, property insulation and upfront costs all need careful consideration.
Common Storage Heater Problems and What to Check
Storage heaters can develop problems, particularly older models.
Here are a few common issues and possible explanations.
The Heater Is Not Warm in the Morning
Possible causes include:
- The input setting is too low.
- The off-peak charging period is not working.
- The heater is not receiving electricity.
- A fuse, switch or internal component has failed.
Check the settings and your electricity supply first. If the heater still does not charge, contact a qualified electrician or heating professional.
The Room Gets Cold Before Evening
The heater may be releasing heat too quickly.
Try lowering the output setting during the morning and when you are away. If the heater still runs out early, you may need a higher overnight charge, improved insulation or a heater with better heat retention.
The Heater Is Using Too Much Electricity
Check whether the input setting is unnecessarily high or whether you are regularly using daytime boost.
Compare your meter readings across different days and review your tariff.
The Heater Makes Unusual Noises
Some clicking or expansion noises can happen as the heater warms up and cools down. However, unusual buzzing, burning smells, visible damage or signs of overheating should not be ignored.
Switch off the appliance if you suspect a fault and seek professional advice. Do not open the heater or attempt electrical repairs yourself.
Safety Tips for Using Storage Heaters
Storage heaters can become very hot, so basic safety matters.
- Keep clothing, curtains and other flammable materials away from the heater.
- Do not cover the appliance.
- Follow the manufacturer’s instructions for clearances.
- Avoid blocking air outlets.
- Do not attempt to repair internal electrical parts yourself.
- Arrange professional checks if the heater has damaged wiring or unusual symptoms.
If you have children or pets, make sure they cannot easily touch hot surfaces.
Always follow the safety guidance supplied with your particular model.
Frequently Asked Questions
1. Do storage heaters use electricity during the day?
Traditional storage heaters mainly use electricity during their charging period, often overnight. However, some models have a boost or convector function that can draw additional electricity during the day. Check your model’s instructions to understand how it works.
2. Can I use storage heaters without Economy 7?
Yes. Storage heaters can operate without Economy 7, but you may not benefit from cheaper overnight electricity. Other time-of-use tariffs may be suitable. Compare the available rates and check that your meter and heater are compatible.
3. Should I leave my storage heater on all the time?
You do not necessarily need to keep it charging every night. Adjust the settings according to the weather and your heating needs. If you do not need heating during warmer months, switch it off according to the manufacturer’s instructions.
4. Why does my storage heater run out of heat by evening?
It may be releasing warmth too quickly, storing too little heat overnight or losing heat because of poor insulation. Try reducing the output setting during the day and check whether the input setting is suitable for the weather.
5. Are modern storage heaters better than old ones?
Modern storage heaters generally offer improved controls, better insulation and more flexible heating schedules. High heat retention models can keep stored warmth for longer. However, whether upgrading saves money depends on the purchase price, electricity tariff and how much heating you use.
6. Can storage heaters work with a smart meter?
Yes, many storage heaters can work with compatible smart meter arrangements and suitable electricity tariffs. However, the meter, tariff and heater connection must all support the required charging periods. Ask your energy supplier to confirm compatibility before changing equipment.
Final Verdict
Storage heaters can be a practical heating option for UK homes, especially when paired with a suitable off-peak electricity tariff. The key is to understand their controls, store only the heat you need and avoid unnecessary daytime boost. Modern models offer better control and heat retention, but they are not automatically cheaper for everyone. Compare your tariff, usage and heating needs before deciding whether to keep or replace your existing heaters.
Reliable external sources used
-
Energy Saving Trust – Electric Storage Heaters — heater types and modern controls.
-
Citizens Advice – Using Storage Heaters Efficiently — input, output and boost settings.
-
Centre for Sustainable Energy – Electric Storage Heaters — running costs and high heat retention models.
-
National Energy Action – Getting the Most from Economy 7 — practical off-peak heating advice.